Features
Standard features include ready-to-install insulation modules (walls, ceiling, double-shell floor), integrated acoustic modules, and a door, power connection and power socket.
Options include acoustic design, room design and additional features such as transparent modules, ventilation components and electrical installation.
All features are also available for booths and customized room design (Modulo or audio design). You will receive detailed information in an individual offer.
> Overview of available audio booth and audio box features
Integrated acoustic modules:
The Sound acoustic design type includes mid-/high-frequency absorbers in the walls and ceiling.
In the Studio acoustic design type, broadband absorbers and diffusers in the walls, ceiling and floor are adjusted to one another and to the room shape and proportions.
> Additional information concerning the acoustic design types and interior acoustic features
> Additional information concerning surfaces and colors
Individually planned acoustic designs include acoustic modules selected in accordance with the acoustic concept and adjusted to one another.
Optional features:
Enhanced insulation against structure-borne sound:
Additional acoustic isolation elements can be used to further reduce sound transmission via the floor. They are suitable for all flooring capable of bearing a load, including uneven floors (e.g. plank flooring in old buildings or unfinished floors).
For heavy objects such as pianos or shelving, there are individual acoustic isolation elements.
> Information concerning additional acoustic isolation
> Measured values for impact sound level: Double-shell floor
Individually planned insulation against air-borne sound:
Insulation against air-borne sound can be further enhanced via individual planning of the soundproofing. Here there are often tight constraints due to the permissible floor load-bearing capacity. In case of doubt, we recommend consulting a structural engineer.
Ventilation:
Integrated ventilation system for incoming and outgoing air with two silencers:
Optional designs:
- Passive incoming and outgoing air
- Active incoming and outgoing air, with on-off switch in the door frame
- Active incoming and outgoing air, continuously adjustable, with control in the door frame
The nominal ventilation capacity is 440 m³/h. With reduced ventilation (approx. 50%), the ventilation capacity is sufficient for extended use, and the ventilation is so quiet that it can remain in operation during recording. The external openings are located in the booth ceiling (see diagram) or on vertical exterior wall surfaces.
External ventilation system for incoming and outgoing air with two silencers:
Optional designs:
- Active incoming and outgoing air, with on-off switch in the door frame
- Active incoming and outgoing air, continuously adjustable, with control in the door frame
The nominal ventilation capacity is up to 880 m³/h. With reduced ventilation (approx. 50%), the ventilation capacity is sufficient for extended use, and the ventilation is so quiet that it can remain in operation during recording.
External systems are suitable particularly for larger booths and audio designs.
Wiring, lighting, and electrical and other components:
The cable duct is in the door frame or in the floor. The simple, effective closure guarantees the same high level of soundproofing, even in the case of subsequently installed wiring.
Cable conduits are integrated into the floor for clean routing of wiring, e.g. between cable ducts.
Individual thin cables can be routed unseen in element joints (not shown).
If required, power can be supplied via several separate circuits.
Electrical and audio installation can be done in many positions. In the door frame, cable connections always remain accessible.
For example, the following can be delivered or installed:
- Rotation speed controllers
- Light switches
- Power sockets
- Dimmers
- Telephone/network jacks
- Patchbays
- Loudspeakers
- Equipment mounts
- Smoke detectors
- Sprinkler outlets
Swivel-mounted built-in ceiling luminaires with LEDs or energy-saving lamps can provide general ambient lighting, or in sufficient numbers can also illuminate the work.
Luminaires can be surface-mounted on the wall or ceiling, with hidden cable routing.
Sound-absorbing speaker’s table with smooth surface suitable for use as a writing desk. If desired, it can be equipped with cable duct(s) and a microphone boom arm (not shown). It has a painted surface, with colors selected from the RAL color scale, or a high-tech textile surface.
Doors:
> Additional information about doors
Transparent modules:
> Additional information about windows, corner glazing and transparent absorber films
Room design (surfaces and colors):
> Additional information about surfaces and colors